Polyurethane Mix Additive 2oz

Polyurethane Mix Additive 

2oz Polyurethane Mix Additive

Add just a couple drops of the Polyurethane to your thinned
paint.  Just one or two drops is all you need. The Poly
greatly increases flow from your airbrush on top of the already amazing
flow and leveling of the paint. The results are further leveling ,
durability , increased sanding capabilities and will also add a very
light eggshell finish. When spraying straight from the bottle with out
thinning your paint add one or 2 drops and adjust your PSI accordingly.
You can pull ultra fine lines.   Figure painters add a drop
for slower blending. Adding too much polyurethane
 will cause the paint to dry much slower. Do not add Poly to
the Mission Models Primer. Remember less is more. 

Example: If you have 20 drops of paint in your epoxy mixing
cup add 2 drops of poly. We advise hand mixing VS shaking

Store
between 50-75F. Do not expose to extreme heat or direct sunlight and do
not allow to freeze. Mission Models Poly is a temperature sensitive
product like that of many other products in the hobby and
industrial market.  Poly can be kept in your fridge if needed
as an option.  Please note that some chemicals do not
have an indefinite shelf life.  Some
chemicals will breakdown over time like that of CA glues ,
Epoxy resins etc.  This includes polyurethane. 
Mission Model poly will last a long time when properly taken care
of.  Mission Models can not take responsibility for improperly
used or stored products.