Green Eggs (Egg Launcher & English Only) Skill INT

An Egg lofting rocket designed for Estes
C11 and D engines. Carrying a regular size raw egg as a
payload comes very close to exceeding max lift capability of most C6
engines used in other eggloft kits. Use a C11
engines and you get a safe stable flight and a recovery suited for
small sized flying fields.

Clear payload is big enough to carry TWO eggs! (with a D12-3
engine). Swept fins allow the rocket to stand by itself. The main body
tube and clear payload section are both the same diameter allowing a
standard launch lug to be glued into place with no awkward stand-off
needed. Through the wall thick balsa fins for easier alignment and
super strength.

All these features add up to less time building and more time
for your students to perform experiments with their
“eggstronauts”.

WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine
sandpaper, carpenter’s glue, sanding block, hobby knife,
masking tape, clear tape, primer (white), paint (green, white) and
clear coat (optional). Tools, construction and finishing supplies not
included.

WHAT YOU NEED TO LAUNCH (sold separately): Estes
Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes
model rocket engines, starters
and recovery
wadding. Four 1.5V high quality AA alkaline batteries are
also required for launch controller (not included).